A Porous Fluoride-Substituted Bovine-Derived Hydroxyapatite Scaffold Constructed for Applications in Bone Tissue Regeneration.

Hydroxyapatite is widely used in bone implantation because of its similar mineral composition to natural bone, allowing it to serve as a biocompatible osteoconductive support. A bovine-derived hydroxyapatite (BHA) scaffold was developed through an array of defatting and deproteinization procedures. The BHA scaffold was substituted with fluoride ions using a modified sol-gel method to produce a bovine-derived fluorapatite (BFA) scaffold. Fourier-transform infrared spectroscopy and X-ray diffraction analysis showed that fluoride ions were successfully substituted into the BHA lattice. According to energy dispersive X-ray analysis, the main inorganic phases contained calcium and phosphorus with a fluoride ratio of ~1-2 wt%. Scanning electron microscopy presented a natural microporous architecture for the BFA scaffold with pore sizes ranging from ~200-600 µm. The BHA scaffold was chemically stable and showed sustained degradation in simulated-body fluid. Young's modulus and yield strength were superior in the BFA scaffold to BHA. In vitro cell culture studies showed that the BFA was biocompatible, supporting the proliferative growth of Saos-2 osteoblast cells and exhibiting osteoinductive features. This unique technique of producing hydroxyapatite from bovine bone with the intent of producing high performance biomedically targeted materials could be used to improve bone repair.

Demineralized dentin matrix for bone regeneration in dentistry: A critical update.

Over the last few decades, several new materials and techniques have been developed for bone regeneration. Scaffolds based on demineralized dentin matrix (DDM) present an attractive option due to their availability and several animal and human studies have been conducted to ascertain their utility in regenerative dentistry. The aim of this review was to summarize the recent studies conducted on DDM and used for bone grafts. PubMed, Web of Science, and Scopus were used to search for studies published within the last 10 years. The keywords and terms used were: "demineralized dentine matrix", "bone grafting", "bone augmentation" and "guided tissue regeneration" in various combinations. Original studies (in vitro, animal and human) and systematic reviews were included in the literature search. The literature search initially identified 23 studies (16 animal studies and 7 clinical reports. Most studies included in this review indicate that DDM has demonstrated promising results in a variety of dental and regenerative medicine applications. Further studies are required to completely comprehend its characteristics and prospective applications. Future studies should also focus on optimizing the processing protocols for the production of DDM-based scaffolds.

A randomized clinical trial investigating the effect of three vital tooth bleaching protocols on oral health-related quality of life.

Objectives: This study aimed to compare changes in oral health-related quality of life (OHRQoL) resulting from three vital tooth bleaching protocols. Methods: The participants (n = 105) were randomly assigned to one of three vital bleaching treatment groups: home bleaching (HB), in-office bleaching (IOB), or combined bleaching (CB). HB involved the use of custom-made trays and 10% carbamide peroxide for a 14-day treatment period. IOB utilized 37.5% hydrogen peroxide applied in three cycles. CB treatment involved the use of IOB followed by HB. Tooth colour change was evaluated using a shade guide (ΔVS) and a digital spectrophotometry device (ΔES). The Oral Health Impact Profile-14 (OHIP-14) and Oral Impact on Daily Performance-22 (OIDP-22) instruments were used to assess changes in OHRQoL at baseline, 15-days and 6-month recalls. Linear mixed models were used to estimate between- and within-group differences. Results: All bleaching protocols led to significant improvements in overall OHIP-14 scores at the 6-month recall (p ≤ 0.037). CB and IOB treatments were associated with more substantial positive impacts on overall scores, psychological discomfort, physical disability (CB only), and psychological disability (CB only) compared to HB (p ≤ 0.011). Significant enhancements in OIDP-22 scores were observed in the CB and HB groups at the 6-month recall compared to baseline (p ≤ 0.006), with evidence indicating that these improvements were greater in the CB group compared to the IOB group (p = 0.007). Conclusion: All bleaching treatments demonstrated a positive impact on OHRQoL. However, the positive impact was most consistent across domains and age groups in the CB group. The positive impact was less pronounced in older age groups.

Effectiveness of gold nanoparticles in prevention and treatment of oral mucositis in animal models: a systematic review.

BACKGROUND: Oral mucositis remains a significant complication during cancer therapy with no effective treatment. Gold nanoparticles offer anti-inflammatory, antioxidant properties with low toxicity. This study systematically reviews the literature assessing gold nanoparticles in the management of oral mucositis in animal models. METHODS: A literature search was undertaken using MEDLINE, Embase, PubMed, and Web of Science databases, using the format for Systematic Review Centre for Laboratory Animal Experimentation. Prior to the review, the protocol was registered in the systematic review register, PROSPERO (registration no. CRD42021272169). Outcome measures included ulceration, histopathological scores, inflammatory mediators, microbial growth, and pain. Study quality was analysed by SYRCLE risk-of-bias tool. RESULTS: Only one study met the inclusion criteria, documenting reduction in ulceration, inflammatory, and oxidative biomarkers. Exposure to AuNPs prevented inflammatory response induced by 5-fluorouracil in oral mucosa of hamsters. However, a high risk of bias necessitates further research. CONCLUSION: This review identifies a potential therapeutic strategy for prevention and management of oral mucositis. It also provides future direction for gold nanoparticle research in oral mucositis; however, there is lack of sufficient evidence to derive any conclusion. Research with standardized parameters including nanoparticle size, capping agent, surface charge, and appropriate oral mucositis animal models will establish risk-benefit balance and margin of safety for therapeutic use of gold nanoparticles for oral mucositis.

In Vitro Models Used in the Formation of Root Caries Lesions-A Review of the Literature.

The management of root caries remains a challenge for clinicians due to its unique anatomical location and structure. There is increasing interest in utilising artificial root caries lesions to develop new strategies for remineralisation. An ideal protocol has not yet been agreed upon. The aim of this review is to provide a structured overview of previously reported in vitro root caries models. The literature was screened and mined for information mainly on substrate selection, model systems utilised, and variables used in the models. Human roots (60%) were the most frequently used substrates, followed by bovine roots (40%). Chemical models (69%) were the most frequently utilised model systems, followed by microbiological models (27%), to form root caries lesions. Acetate buffer solution (80%), pH 5.0 or above (40%), and a demineralisation time of five days (25%) were the common variables used in the chemical systems, while mono-species biofilm was most frequently used (73%) in microbiological models and Streptococcus mutans was the most common bacterial strain utilised in these models (80%). This review highlights the variability amongst the experimental approaches, discusses the advantages and limitations of these approaches, and emphasises that standardisation of experimental conditions along with sustained research will benefit root caries research.

Accuracy of digitally coded healing abutments: A systematic review.

The aim of this systematic review was to evaluate the in vitro accuracy of dental implant impressions taken using digitally coded healing abutments (CHAs) compared with impressions taken with conventional techniques (CI) and/or within the CHA group at varying degrees of angulations for multiple implant units. Two independent reviewers conducted a systematic electronic search in the MedLine, PubMed, Google Scholar, Cochrane Library, Web of Science, and Scopus databases. Some of the employed key terms, combined with the help of Boolean operators, were: "digitally coded healing abutments", "encode healing abutment", "dental implants", "impression accuracy", "digital impression", and "conventional impression". Publication dates ranged from January 2010 to November 2022. A total of 7 articles fulfilled the inclusion criteria: 6 studies compared the accuracy of CHA with conventional pick-up impression techniques, and one study only used CHAs at different angulations and heights to compare accuracy within the group. The results were divided into Group A (elastomeric impression of CHA) and Group B (CHA + Intraoral scanner). According to the results of this systematic review, elastomeric impression of CHA performed poorly when compared to CI for multiple implants, although an intraoral scan of CHA appears to be more accurate. Within the CHA group, the angulation and visible height of CHA play a significant role in impression accuracy. However, more studies are needed before CHA can be recommended for all non-parallel multiple implant-supported restorations.

Factors influencing success rate of ceramic veneers on endodontically treated anterior teeth: A systematic review.

STATEMENT OF PROBLEM: More conservative restorative approaches have been advocated for nonvital anterior teeth as an alternative to complete coverage crowns to maximize the preservation of tooth structure. Systematic reviews that investigated factors influencing the success rate of porcelain veneers on endodontically treated anterior teeth are lacking. PURPOSE: The purpose of this systematic review was to investigate factors influencing the success rate of porcelain veneers on endodontically treated anterior teeth. MATERIAL AND METHODS: Searches were performed across Medline/PubMed, Google Scholar, Scopus, and Web of Science electronic databases. In addition, articles were hand searched from references of systematic reviews concerning porcelain veneers and endodontically treated teeth. RESULTS: After screening and applying the eligibility, inclusion, and exclusion criteria, 7 articles met the inclusion criteria. Factors that could positively influence the success rate of endodontically treated anterior veneered teeth were immediate dentin sealing, labially positioning of the endodontic access cavity, and incorporating fiber posts. CONCLUSIONS: The use of fiber posts and labial positioning of the endodontic access cavity could positively influence the success rate of porcelain veneers on endodontically treated teeth. The effect of immediate dentin sealing on the survival rate of endodontically treated veneered teeth is still unclear and further research is needed.

In vitro effects of wool-derived keratin on human dental pulp-derived stem cells for endodontic applications.

In this study we examine the influence of wool-derived keratin intermediate filament proteins (kIFPs) on human dental pulp-derived stem cells (hDPSCs). kIFPs were diluted (10 mg/mL to 0.001 mg/mL) in cell culture media. Effects on hDPSCs proliferation were measured using Alamar blue assay. Keratin concentrations of 1 mg/mL and 0.1 mg/mL were tested for odontogenic differentiation and mineralisation. Alkaline phosphatase (ALP) quantification (7th, 14th, and 21st days), alizarin red S (AR-S) staining and calcium quantification (21st day), reverse transcription polymerase chain reaction (RT-PCR, collagen expression), and immunocytochemical staining for dentin matrix protein (DMP) were performed. hDPSCs showed higher proliferation with kIFPs of 0.1 mg/mL or less (p < 0.0001). The 0.1 mg/mL keratin concentration promoted odontogenic differentiation, confirmed by increased ALP activity, significant calcium deposits (AR-S staining, p < 0.05), up-regulated collagen expression (RT-PCR, p < 0.05), and positive DMP staining. These results suggest that kIFPs could be a potential biomaterial for pulp-dentin regeneration.

Development, physicochemical characterization and in-vitro biocompatibility study of dromedary camel dentine derived hydroxyapatite for bone repair.

This study aimed to produce hydroxyapatite from the dentine portion of camel teeth using a defatting and deproteinizing procedure and characterize its physicochemical and biocompatibility properties. Biowaste such as waste camel teeth is a valuable source of hydroxyapatite, the main inorganic constituent of human bone and teeth which is frequently used as bone grafts in the biomedical field. Fourier Transform infrared (FTIR), and micro-Raman spectroscopy confirmed the functional groups as-sociated with hydroxyapatite. X-ray diffraction (XRD) studies showed camel dentine-derived hydroxyapatite (CDHA) corresponded with hydroxyapatite spectra. Scanning electron micros-copy (SEM) demonstrated the presence of dentinal tubules measuring from 1.69-2.91 µm. The inorganic phases of CDHA were primarily constituted of calcium and phosphorus, with trace levels of sodium, magnesium, potassium, and strontium, according to energy dispersive X-ray analysis (EDX) and inductively coupled plasma mass spectrometry (ICP-MS). After 28 days of incubation in simulated body fluid (SBF), the pH of the CDHA scaffold elevated to 9.2. in-vitro biocompatibility studies showed that the CDHA enabled Saos-2 cells to proliferate and express the bone marker osteonectin after 14 days of culture. For applications such as bone augmentation and filling bone gaps, CDHA offers a promising material. However, to evaluate the clinical feasibility of the CDHA, further in-vivo studies are required.

Micro-CT Evaluation of Spontaneous Apexification of an Immature Tooth following Trauma.

This case reports on the micro-computerised tomography (CT) images of a periapical calcified dome following spontaneous apexification as a subsequence of trauma. An immature, maxillary central incisor was found to be non-vital one month following trauma. The tooth had minimal signs of structural damage; however, there was radiographic evidence of spontaneous apexification. The tooth suffered a second traumatic episode two years later and was decoronated to facilitate bone retention during osseous development. The patient presented with swelling and pain 36 months later, and the tooth root was extracted. The root was embedded in resin, and cross-sectional images were obtained using micro-CT. Analysis of the images provided insight into the structure of the calcified dome that formed following the first traumatic injury.

The Effect of 10% Carbamide Peroxide Dental Bleaching on the Physical Properties of Invisalign Aligners: An In Vitro Study.

The high aesthetic demands of patients have increased their requests to align their teeth using clear aligners, including Invisalign. Patients also want to have their teeth whitened for the same purpose; the use of Invisalign as a bleaching tray at night has been reported in few studies. However, whether 10% carbamide peroxide affects the physical properties of Invisalign is unknown. Therefore, the objective of this study was to evaluate the effect of 10% carbamide peroxide on the physical properties of Invisalign when used as a bleaching tray at night. Twenty-two unused Invisalign aligners (Santa Clara, CA, USA) were used to prepare 144 specimens to test their tensile strength, hardness, surface roughness, and translucency. The specimens were divided into four groups: a testing group at baseline (TG1), a testing group after application of bleaching material at 37 °C for 2 weeks (TG2), a control group at baseline (CG1), and a control group after immersion in distilled water at 37 °C for 2 weeks (CG2). Statistical analysis was conducted using a paired t-test, Wilcoxon signed rank test, independent samples t-test, and Mann-Whitney test to compare samples in CG2 to CG1, TG2 to TG1, and TG2 to CG2. Statistical analysis showed no statistically significant difference between the groups for all physical properties, except for hardness (p-value < 0.001) and surface roughness (p-value = 0.007 and p-value < 0.001 for the internal and external surface roughness, respectively), which revealed a reduction in hardness values (from 4.43 ± 0.86 N/mm2 to 2.2 ± 0.29 N/mm2) and an increase in surface roughness (from 1.6 ± 0.32 Ra to 1.93 ± 0.28 Ra and from 0.58 ± 0.12 Ra to 0.68 ± 0.13 Ra for the internal and external surface roughness, respectively) after 2 weeks of dental bleaching. Results showed that Invisalign can be used for dental bleaching without excessive distortion or degradation of the aligner material. However, future clinical trials are required to further assess the feasibility of using Invisalign for dental bleaching.

Correction: Mansoor et al. Effect of Currently Available Nanoparticle Synthesis Routes on Their Biocompatibility with Fibroblast Cell Lines. Molecules 2022, 27, 6972.

The authors wish to make the following correction to this paper [...].

Potential Beneficial Effects of Hydroxyapatite Nanoparticles on Caries Lesions In Vitro-A Review of the Literature.

Dental caries is one of the most common human diseases which can occur in both primary and permanent dentitions throughout the life of an individual. Hydroxyapatite is the major inorganic component of human teeth, consequently, nanosized hydroxyapatite (nHAP) has recently attracted researchers' attention due to its unique properties and potential for caries management. This article provides a contemporary review of the potential beneficial effects of nHAP on caries lesions demonstrated in in vitro studies. Data showed that nHAP has potential to promote mineralization in initial caries, by being incorporated into the porous tooth structure, which resulted from the caries process, and subsequently increased mineral content and hardness. Notably, it is the particle size of nHAP which plays an important role in the mineralization process. Antimicrobial effects of nHAP can also be achieved by metal substitution in nHAP. Dual action property (mineralizing and antimicrobial) and enhanced chemical stability and bioactivity of nHAP can potentially be obtained using metal-substituted fluorhydroxyapatite nanoparticles. This provides a promising synergistic strategy which should be explored in further clinical research to enable the development of dental therapeutics for use in the treatment and management of caries.

The effect of an additional application of sealer prior to backfilling in the Continuous Wave of Condensation technique.

An additional sealer application was investigated prior to backfilling with the Continuous Wave of Condensation (CWC). 105 Palatal roots were sectioned and prepared to a file size 40, 0.06 taper with Vortex Blue® files. Groups A, B and C had a single sealer application before while groups D, E and F, received a second application of dyed sealer prior to backfilling. Roots were sectioned at 2,3,4,6,7 and 8 mm from the root apex. The percentage of sealer and dentinal tubular penetration depth was calculated at each level. At each ascending level, the sealer percentage decreased for each experimental group while the number of outer third penetration depths increased when all groups were combined. An additional sealer application prior to backfilling had minimal effect on the percentage of sealer or outer third penetration depths and can be considered a clinical preference rather than an imperative step with the CWC technique.

In Vitro Biological Testing of Dental Materials.

Dental materials are specially fabricated materials designed for use in dentistry. A variety of materials may be used, including cements, impression, lining, and dental restorative materials. Some of these dental materials provide temporary dressings while others are more permanent and are in contact with host tissue for prolonged periods of time. Consequently, newly developed dental materials not only require mechanical, chemical, and physical testing but also require in vitro analysis to ensure their safety and biocompatibility. The current chapter provides background on dental material characterization and a protocol for its in vitro biological testing.

Investigation of a Novel Injectable Chitosan Oligosaccharide-Bovine Hydroxyapatite Hybrid Dental Biocomposite for the Purposes of Conservative Pulp Therapy.

This study aimed to develop injectable chitosan oligosaccharide (COS) and bovine hydroxyapatite (BHA) hybrid biocomposites, and characterise their physiochemical properties for use as a dental pulp-capping material. The COS powder was prepared from chitosan through hydrolytic reactions and then dissolved in 0.2% acetic acid to create a solution. BHA was obtained from waste bovine bone and milled to form a powder. The BHA powder was incorporated with the COS solution at different proportions to create the COS-BHA hybrid biocomposite. Zirconium oxide (ZrO2) powder was included in the blend as a radiopacifier. The composite was characterised to evaluate its physiochemical properties, radiopacity, setting time, solubility, and pH. Fourier-transform infrared spectroscopic analysis of the COS-BHA biocomposite shows the characteristic peaks of COS and hydroxyapatite. Compositional analysis via ICP-MS and SEM-EDX shows the predominant elements present to be the constituents of COS, BHA, and ZrO2. The hybrid biocomposite demonstrated an average setting time of 1 h and 10 min and a pH value of 10. The biocomposite demonstrated solubility when placed in a physiological solution. Radiographically, the set hybrid biocomposite appears to be more radiopaque than the commercial mineral trioxide aggregate (MTA). The developed COS-BHA hybrid biocomposite demonstrated good potential as a pulp-capping agent exhibiting high pH, with a greater radiopacity and reduced setting time compared to MTA. Solubility of the biocomposite may be addressed in future studies with the incorporation of a cross-linking agent. However, further in vitro and in vivo studies are necessary to evaluate its clinical feasibility.

Extraction of Hydroxyapatite from Camel Bone for Bone Tissue Engineering Application.

Waste tissues such as mammalian bone are a valuable source from which to extract hydroxyapatite. Camel bone-based hydroxyapatite (CBHA) was extracted from the femur of camel bones using a defatting and deproteinization procedure. The extracted CBHA was mechanically, chemically, physically, morphologically and structurally characterized. Fourier-Transform Infra-Red (FTIR) spectra, Micro-Raman, and X-ray diffraction analysis confirmed successful extraction of hydroxyapatite. The mechanical properties of the CBHA scaffold were measured using a Universal Instron compression tester. Scanning electron microscopy showed the presence of a characteristic interconnected porous architecture with pore diameter ranging from 50-600 µm and micro-computer tomography (Micro-CT) analysis identified a mean porosity of 73.93. Thermogravimetric analysis showed that the CBHA was stable up to 1000 °C and lost only 1.435% of its weight. Inductively coupled plasma-mass spectrometry (ICP-MS) and Energy-dispersive-X-ray (EDX) analysis demonstrated the presence of significant amounts of calcium and phosphorus and trace ions of sodium, magnesium, zinc, lead and strontium. Following 21 days of incubation in simulated body fluid (SBF), the pH fluctuated between 10-10.45 and a gradual increase in weight loss was observed. In conclusion, the extracted CBHA is a promising material for future use in bone tissue regeneration applications.

Effect of Currently Available Nanoparticle Synthesis Routes on Their Biocompatibility with Fibroblast Cell Lines.

Nanotechnology has acquired significance in dental applications, but its safety regarding human health is still questionable due to the chemicals utilized during various synthesis procedures. Titanium nanoparticles were produced by three novel routes, including Bacillus subtilis, Cassia fistula and hydrothermal heating, and then characterized for shape, phase state, size, surface roughness, elemental composition, texture and morphology by SEM, TEM, XRD, AFM, DRS, DLS and FTIR. These novel titanium nanoparticles were tested for cytotoxicity through the MTT assay. L929 mouse fibroblast cells were used to test the cytotoxicity of the prepared titanium nanoparticles. Cell suspension of 10% DMEM with 1 × 104 cells was seeded in a 96-well plate and incubated. Titanium nanoparticles were used in a 1 mg/mL concentration. Control (water) and titanium nanoparticles stock solutions were prepared with 28 microliters of MTT dye and poured into each well, incubated at 37 °C for 2 h. Readings were recorded on day 1, day 15, day 31, day 41 and day 51. The results concluded that titanium nanoparticles produced by Bacillus subtilis remained non-cytotoxic because cell viability was >90%. Titanium nanoparticles produced by Cassia fistula revealed mild cytotoxicity on day 1, day 15 and day 31 because cell viability was 60−90%, while moderate cytotoxicity was found at day 41 and day 51, as cell viability was 30−60%. Titanium nanoparticles produced by hydrothermal heating depicted mild cytotoxicity on day 1 and day 15; moderate cytotoxicity on day 31; and severe cytotoxicity on day 41 and day 51 because cell viability was less than 30% (p < 0.001). The current study concluded that novel titanium nanoparticles prepared by Bacillus subtilis were the safest, more sustainable and most biocompatible for future restorative nano-dentistry purposes.

The Regenerative Potential of Decellularized Dental Pulp Extracellular Matrix: A Systematic Review.

INTRODUCTION: The regeneration of dental pulp remains a challenge. Although several treatment modalities have been proposed to promote pulpal regeneration, these treatments have several drawbacks. More recently, decellularized dental pulp extracellular matrix (DP-ECM) has been proposed to regenerate dental pulp. However, to date, no systematic review has summarized the overall outcome and assessed the available literature focusing on the endodontic use of DP-ECM. The aim of this systematic review is to critically appraise the literature, summarize the overall outcomes, and provide clinical recommendations about DP-ECM. METHODOLOGY: Following the Participants Intervention Control and Outcomes (PICO) principle, a focused question was constructed before conducting a search of the literature and of electronic research databases and registers. The focused question was: 'Compared to controls, does decellularized dental pulp extracellular matrix (DP-ECM) stimulate the regeneration of dental pulp cells and tissue?' Quality assessment of the studies was carried out using Guidelines for Reporting Pre-Clinical in Vitro Studies on Dental Materials and ARRIVE guidelines. RESULTS: 12 studies were included in this review. Data from five in vitro experiments and eight in vivo experiments were extracted and the quality of the experiments was assessed. In majority of the studies, DP-ECM appeared to have stimulated pulpal regeneration. However, several sources of bias and methodological deficiencies were found during the quality assessment. CONCLUSION: Within the limitations of this review and the included studies, it may be concluded that there is insufficient evidence to deduce the overall efficacy of DP-ECM for pulpal regeneration. More research, clinical and pre-clinical, is required for more conclusive evidence.

Clinical and Microbiological Evaluation of a Chlorhexidine-Modified Glass Ionomer Cement (GIC-CHX) Restoration Placed Using the Atraumatic Restorative Treatment (ART) Technique.

The aims of this study were to investigate the clinical effectiveness and patient acceptability of a modified glass ionomer cement placed using the atraumatic restorative treatment (ART) technique to treat root caries, and to carry out microbiological analysis of the restored sites. Two clinically visible root surface carious lesions per participant were restored using ART. One was restored with commercial glass ionomer cement (GIC) (ChemFil® Superior, DENTSPLY, Konstonz, Germany) which acted as the control. The other carious root lesion was restored with the same GIC modified with 5% chlorhexidine digluconate (GIC-CHX; test). Patient acceptability and restoration survival rate were evaluated at baseline and after 6 months. Plaque and saliva samples around the test and control restorations were collected, and microbiological analysis for selected bacterial and fungal viability were completed at baseline, and after 1, 3, and 6 months. In total, 52 restorations were placed using GIC and GIC-CHX in 26 participants; 1 patient was lost to follow-up. After reviewing the restorations during their baseline appointments, participants indicated that they were satisfied with the appearance of the restorations (n = 25, 96%) and did not feel anxious during the procedure (n = 24, 92%). Forty-eight percent (n = 12) of the GIC-CHX restorations were continuous with the existing anatomic form as opposed to six for the GIC restorations (24%), a difference which was statistically significant (p = 0.036). There was no statistically significant reduction in the mean count of the tested microorganisms in plaque samples for either type of restorations after 1, 3, or 6 months. Restoration of carious root surfaces with GIC-CHX resulted in higher survival rates than the control GIC. ART using GIC-CHX may therefore be a viable approach for use in outreach dental services to restore root surface carious lesions where dental services are not readily available, and for older people and special needs groups.